Prepare New Concrete For Coatings - ENVIROBOND

Prepare New Concrete For Coatings - ENVIROBOND

Preparing New Concrete   If you are surfacing over bare concrete you should apply one coat of EnviroBond acrylic adhesion promoter, with a paint roller, to ensure good adhesion of the EnviroFill and/or EnviroCoat acrylic coatings. Please call us if your concrete does not have a broom finish.   1 - 5 gallon pail will cover 1500 square feet. 

EnviroBond Specification Sheet

2-RTU2103W

$77.95

Add to cart

More info

Preparing New Concrete if you are surfacing over bare concrete you should apply one coat of EnviroBond acrylic bonding agent to ensure good adhesion of the EnviroFill and/or EnviroCoat acrylic coatings. Prior to the application of Envirobond, acid etch the concrete with a solution of 3 parts water and 1 part Muriatic acid. Flush the acid from the surface thoroughly. Please call us if your concrete does not have a broom finish. 1 - 5 gallon pail will cover 1500 square feet.

EnviroBond Specification Sheet

Comments

Write your review

Prepare New Concrete For Coatings - ENVIROBOND

Prepare New Concrete For Coatings - ENVIROBOND

Preparing New Concrete   If you are surfacing over bare concrete you should apply one coat of EnviroBond acrylic adhesion promoter, with a paint roller, to ensure good adhesion of the EnviroFill and/or EnviroCoat acrylic coatings. Please call us if your concrete does not have a broom finish.   1 - 5 gallon pail will cover 1500 square feet. 

EnviroBond Specification Sheet

Write your review

10 other products in the same category: